DIY Dock Packages Dock Lights & Dock Packages

  • Category: DIY Dock Packages
  • SKU: DOK0326




You’ll need this if you’re purchasing multiple gangways and connecting them to get your dock further out into your pond or lake.  Our standard 4’x 8′ gangway comes with one float as one side usually connects into the shoreline.  If you are using multiple gangways, you’ll need 2 floats on each 8′ gangway out in the water and connector pins to connect the gangways together.

NOTE:  For gangway’s longer than 8′, you will need additional floats.  For 8′ connector gangways, we recommend two floats total (one with the 4′ x 8′ gangway and a second with the accessory kit).  Add one additional Gangway Accessory Kit for each 4′ of gangway length.  So for a 12′ Gangway that is out in the water, you would need 2 Accessory Kits.  For a 16′ Gangway, you would need 3 Accessory Kits to go with the initial gangway.

This kit includes:

  • (1) 24″ x 48″ x 16″ float
  • (6) 3/8″ Galvanized Lag Bolts
  • (6) 3/8″ Galvanized Fender Washers
  • (2) Connector Pins with Cotter Pins